4x1 HDMI® Switch w/ CEC Engine (Full 1080p HD) w/ 3D support
If you're looking for a switch that will allow you to take advantage of the advanced HDMI® features your equipment has to offer, then this is the switch for you. This switch features a CEC (consumer electronics control) engine that allows the switch to communicate with your devices, automatically power your TV on when a source device is powered up, and will even switch your TV to the correct input for the connected device*. This switch also supports advanced HDMI® features, such as 3D video and Deep Color, and offers full support for advanced digital audio formats including DTS-HD Master Audio™ and Dolby TrueHD™.
* Certain devices may not be compatible with the CEC engine and certain functions may not work with your specific equipment. Manufacturers have developed different variations of the CEC protocol (Samsung ANYNET+, Sony Bravia Sync, Sharp Aquos Link, etc.), and equipment from different manufacturers may not be fully compatible and CEC functions may not work properly.
NOTE: 24AWG or thicker (lower AWG number) cables are HIGHLY RECOMMENDED for best performance. Some devices will require thicker gauge, category 2 cables to work with this switch. For runs up to 15ft, use 24AWG. For runs of 20ft or more, use 22AWG (which is thicker than 24AWG.)
Inputs/Outputs: (4) HDMI® inputs - (1) HDMI® output
Gold plated input/output connectors
IR remote control
Supports full HD 1080p resolution
Supports Deep Color 12-bits per channel at 1080p
Digital audio formats supported: DTS-HD Master Audio™, Dolby TrueHD™
HDMI® CEC functions supported: routing change, one touch play, stand by, CEC pass-through
Power supply: 5V DC 1A output - 100v-240v input
In the box:
4x1 HDMI® Switch - HD-411E3
5V DC 1A Power Adapter
Submit a Review...